Dolomite Powder Lumps Grinding Machine

Customer's Background:

Dolomite Powder Lumps Grinding Machine operation precautions

                        

The Dolomite Powder Lumps Grinding Machine is used in many industrial sectors such as mineral processing, chemical, power generation and building materials. It is widely used for grinding and grinding various materials, especially for materials with various hardnesses. Below we highlight the attention of the Dolomite Powder Lumps Grinding Machine operation.

Attention before booting

1. Before the operation of Dolomite Powder Lumps Grinding Machine, it should have perfect safety protection and control joint marketing and oil pressure adjusting device, and all the flexible and reliable meter measuring devices needed.

2. Pay attention to check the vibration of the base, whether the anchor bolts and the connecting screws of each part are loose; and whether the motor of the Dolomite Powder Lumps Grinding Machine has abnormal sounds, abnormal smells and vibrations.

Lubrication system attention

1. Check whether the oil of the shaft pump, fuel tank and gearbox reaches the standard line; in addition, check whether the oil of the shaft pump, fuel tank and gearbox reaches the standard line in time.

2. Pay attention to check if the lubrication system is normal. For example, unblocked, with or without debris. In addition, pay attention to check if the lubricating oil is sufficient, and solve the problem immediately if there is any problem.

Electrical device attention

1. Check whether the operation buttons such as the motor starting device and the electronic control system are in the normal position.

2. Check if the screws of each part of the motor are loose, whether the grounding wire is reliable, and whether there are scattered ore or debris in the motor.

Attention to the mine

When using the Dolomite Powder Lumps Grinding Machine, it should be noted whether the screw connecting the spoon and the scoop head and the Dolomite Powder Lumps Grinding Machine is loose, whether the bucket feeder is buried by the sand, and whether the spoon and the scoop are worn excessively. Handle immediately.

Attention during shutdown

When preparing to stop the equipment, the correct way to stop it is to stop the grader from lifting the screw and close the anti-sand tank gate after stopping the ore for about 15 minutes. Then, press the stop button, cut off the oil switch to move the motor short-circuit ring to the parking position, then cut off the oil pump switch and stop the water supply.

Special emphasis is placed on stopping the power supply when the vehicle is parked. If there is no notice, the oil switch should be pulled off immediately and the water gate should be closed.

Request for Quotation

You can get the price list and a SBM representative will contact you within one business day.